From @pucc.PRINCETON.EDU:owner-virtu-l@VMD.CSO.UIUC.EDU  Tue Feb 28 10:58:24 1995
Return-Path: <@pucc.PRINCETON.EDU:owner-virtu-l@VMD.CSO.UIUC.EDU>
Received: from mx4.u.washington.edu by stein2.u.washington.edu
	(5.65+UW94.10/UW-NDC Revision: 2.32 ) id AA14269;
	Tue, 28 Feb 95 10:58:24 -0800
Received: from pucc.Princeton.EDU by mx4.u.washington.edu
	(5.65+UW94.10/UW-NDC Revision: 2.31 ) id AA03145;
	Tue, 28 Feb 95 10:58:17 -0800
Message-Id: <9502281858.AA03145@mx4.u.washington.edu>
Received: from PUCC.PRINCETON.EDU by pucc.PRINCETON.EDU (IBM VM SMTP V2R2)
   with BSMTP id 3342; Tue, 28 Feb 95 13:57:38 EST
Received: from UICBIT.UIC.EDU (NJE origin VMMAIL@PPLCATS) by PUCC.PRINCETON.EDU (LMail V1.2a/1.8a) with BSMTP id 0759; Tue, 28 Feb 1995 13:57:27 -0500
Received: from ROO.CC.UIC.EDU (NJE origin LISTSERV@UICBIT) by UICBIT.UIC.EDU
 (LMail V1.2a/1.8a) with BSMTP id 8036; Tue, 28 Feb 1995 12:49:15 -0600
Date:         Tue, 28 Feb 1995 17:00:16 LCL
Reply-To: Niall Fraser <NIALL@SCI.CO.UK>
Sender: "VR / sci.virtual-worlds" <VIRTU-L%UIUCVMD.BITNET@pucc.PRINCETON.EDU>
From: Niall Fraser <NIALL@SCI.CO.UK>
Organization: SCi (Sales Curve Interactive) Ltd.
Subject:      Re: PROD : N-Vision
Comments: To: virtu-l@vmd.cso.uiuc.edu
To: Multiple recipients of list VIRTU-L <VIRTU-L%UIUCVMD.BITNET@pucc.PRINCETON.EDU>
Status: OR

OJ asked about the N-Vision HMD from Division.

The following is from a friend of mine that works for Division.


------- Forwarded Message Follows -------

On the HMD side (I didn't even know we were in Edge this month), the N-Vision
is an extremely high fidelity HMD. It uses small field sequential CRTs to
produce a high resolution full colour stereo or mono display. I suspect the FOV
isn't as wide as your friend had hoped, the reason the HMD extends around the
head is to accomodate the CRTs and the optics. Horizontal FOV depends upon the
overlap you configure the eyes with. Each eye has a Horizontal FOV of about 50
degrees and you can overlap 0% to 100%, vertical FOV is about 40 degrees. I
think the N-Visions CRTs will sync to lots of field sequential signals but we
display either 640x480 resolution or 1280x1024 resolution. We drive 640x480
stereo from a single pipe ONXY with an MCO and 1280x1024 stereo with a twin
pipe system. Obviously you can also run 640x480 on a twin pipe without MCO. You
can have high resolution mono with a single pipe but you must then have 100%
overlap with the eyes.

The HMD costs 60k pounds for an immersive virtual reality configuration
and 70k pounds for a see-through augmented reality version.

I've used these HMD's and they can be extremely effective when they're set up
correctly. My main personal criticism is the attachment to the users head. It
can move slightly which is a real pain, particularly since you look through a
couple of holes in the casing at the display but we have lot's of satisfied
customers using these devices now.

--
 Angus Dorbie                Division Ltd,
 Software Engineer           19 Apex Court,




Niall Fraser, Programmer, Sales Curve Interactive
Viceroy House, Mountbatten Business Centre,
16 Millbrook Road East, Southampton, UK, SO15 1HY
Tel 01703 330930  Fax 01703 339316  Email niall@sci.co.uk

Neat SG info at : http://www.cee.hw.ac.uk/~mapleson

