We are using the same camera and it's exactly like Uwe said.
You must have instaled the pwcx module, and you will get a higer resoluti=
on
but at slower frame rates. =


Because of the frame rate, this camera can't capture movement very well, =
and
we have a lot of "ilumination/marker's material" problems so keep this in=
 mind
for your project.

We also use an ADS Tech Pyro Webcam (Firewire) which is way better than t=
he
logitech and for aproximately $2 more dollars.

I hope this can help you
GREETINGS !
Pedro Cervantes


Uwe W=F6ssner <woessner@h ......> wrote:

> Hi Iryna,
> =

> I don=B4t know the Logitech Quickcam Pro but if it is working with the
> Philips driver you might also have to load the pwcx driver to get "high=
" =

> resolutions from the camera. At least this is the case for the Philips =

> Camera. have a look at the documentation that comes with the pwc/pwcx =

> driver.
> =

> Regards,
>   Uwe
> =

> Iryna Skrypnyk wrote:
> =

> > Hi guys,
> > =

> > I'm running ARToolKit on Linux RH9.0 with Logitech Quickcam Pro 4000,=

> >  using Uwe Woessner's patch to version 2.61 with YUV420P support. I h=
ave
> > the default image size set to 320x240 in both config.h and modules.co=
nf
> > under pwc options, and when I run simpleTest the image appears coarse=
 (as
if a
> > lower resolution image were magnified). Same thing happens when I try=

640x480.
> > I've tested the camera with camstream, this problem doesn't occur the=
re.
> > I'm new to ARToolKit and I would appreciate any suggestions.
> > =

> > Thanks for your help,
> > =

> > Iryna
> =

> -- =

>                 \\\|/// *HoechstLeistungs Rechenzentrum Stuttgart*
>     _I_         ( o o )            *Visualisierung/VR*              _I_=

>    (_@_)----oo0O--(_)--O0oo----------------------------------------(_@_=
)
>     | |      Uwe Woessner             woessner@h ......              | |=

>     | |         .ooo0       http://www.hlrs.de/people/woessner/     | |=

>     |_|         (   )  Oooo. Phone: +49-711-685-5790 or ...-5970    |_|=

>    (_@_)---------\ (---(   )---------------------------------------(_@_=
)
>      I            \_)   ) /                                          I
>                        (_/
> =

> =

Thanks for your advice, guys, I'll get the pwcx.

Cheers,
Iryna


On Fri, 20 Feb 2004, Pedro Cervantes wrote:

> We are using the same camera and it's exactly like Uwe said.
> You must have instaled the pwcx module, and you will get a higer resoluti=
on
> but at slower frame rates.
>
> Because of the frame rate, this camera can't capture movement very well, =
and
> we have a lot of "ilumination/marker's material" problems so keep this in=
 mind
> for your project.
>
> We also use an ADS Tech Pyro Webcam (Firewire) which is way better than t=
he
> logitech and for aproximately $2 more dollars.
>
> I hope this can help you
> GREETINGS !
> Pedro Cervantes
>
>
> Uwe W=F6ssner <woessner@h ......> wrote:
>
> > Hi Iryna,
> >
> > I don=B4t know the Logitech Quickcam Pro but if it is working with the
> > Philips driver you might also have to load the pwcx driver to get "high=
"
> > resolutions from the camera. At least this is the case for the Philips
> > Camera. have a look at the documentation that comes with the pwc/pwcx
> > driver.
> >
> > Regards,
> >   Uwe
> >
> > Iryna Skrypnyk wrote:
> >
> > > Hi guys,
> > >
> > > I'm running ARToolKit on Linux RH9.0 with Logitech Quickcam Pro 4000,
> > >  using Uwe Woessner's patch to version 2.61 with YUV420P support. I h=
ave
> > > the default image size set to 320x240 in both config.h and modules.co=
nf
> > > under pwc options, and when I run simpleTest the image appears coarse=
 (as
> if a
> > > lower resolution image were magnified). Same thing happens when I try
> 640x480.
> > > I've tested the camera with camstream, this problem doesn't occur the=
re.
> > > I'm new to ARToolKit and I would appreciate any suggestions.
> > >
> > > Thanks for your help,
> > >
> > > Iryna
> >
> > --
> >                 \\\|/// *HoechstLeistungs Rechenzentrum Stuttgart*
> >     _I_         ( o o )            *Visualisierung/VR*              _I_
> >    (_@_)----oo0O--(_)--O0oo----------------------------------------(_@_=
)
> >     | |      Uwe Woessner             woessner@h ......              | |
> >     | |         .ooo0       http://www.hlrs.de/people/woessner/     | |
> >     |_|         (   )  Oooo. Phone: +49-711-685-5790 or ...-5970    |_|
> >    (_@_)---------\ (---(   )---------------------------------------(_@_=
)
> >      I            \_)   ) /                                          I
> >                        (_/
> >
> >
>
>
>
>