Este es un mensaje de varios componentes en formato MIME.
--===============1237115620==
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 8bit

Hi there!

I've dowloaded and added to the path of MATLAB the MATLAB Calibration 
Toolbox.
I have followed step by step the instructions of the calibration in [1]. 
It generates three files: "calib_data.mat", "Calib_Results.m" and 
"Calib_Results.mat".
I would like to know wich one of these three files is the one I have to 
use in the "init" method of the ARToolkitPlus Tracker.
I think I have used all of them, but no one works...

[1] http://www.vision.caltech.edu/bouguetj/calib_doc/htmls/example.html

Tanks in advance,
Roberto


---------------------------------------------------------------------------------------------------------------------------------------------------------------------

Imprime sólo lo imprescindible, recuerda tu compromiso con el MEDIO AMBIENTE // Behar beharrezkoa baino ez imprimatu, gogoratu zure INGURUGIROArekiko konpromezua // Before printing think about the ENVIRONMENT

---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.

Mezu honek eta erantsita dituen agiriek (baldin baditu) isilpeko informazioa izan dezakete. Hori dela eta, hutsegite baten ondorioz jasotzen duenak jakin beza bertan dagoen informazioa ezkutukoa dela eta legeak galarazi egiten duela berori baimenik gabe erabiltzea.

This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.hitlabnz.org/pipermail/artoolkit/attachments/20071003/f4dc4de4/attachment.html 

--===============1237115620==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
ARToolKit mailing list
ARToolKit@l .................
http://www.hitlabnz.org/mailman/listinfo.cgi/artoolkit

--===============1237115620==--

Este es un mensaje de varios componentes en formato MIME.
--===============1190315739==
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 8bit

Hi there!

I've dowloaded and added to the path of MATLAB the MATLAB Calibration 
Toolbox.
I have followed step by step the instructions of the calibration in [1]. 
It generates three files: "calib_data.mat", "Calib_Results.m" and 
"Calib_Results.mat".
I would like to know wich one of these three files is the one I have to 
use in the "init" method of the ARToolkitPlus Tracker.
I think I have used all of them, but no one works...

[1] http://www.vision.caltech.edu/bouguetj/calib_doc/htmls/example.html

Tanks in advance,
Roberto


---------------------------------------------------------------------------------------------------------------------------------------------------------------------

Imprime sólo lo imprescindible, recuerda tu compromiso con el MEDIO AMBIENTE // Behar beharrezkoa baino ez imprimatu, gogoratu zure INGURUGIROArekiko konpromezua // Before printing think about the ENVIRONMENT

---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.

Mezu honek eta erantsita dituen agiriek (baldin baditu) isilpeko informazioa izan dezakete. Hori dela eta, hutsegite baten ondorioz jasotzen duenak jakin beza bertan dagoen informazioa ezkutukoa dela eta legeak galarazi egiten duela berori baimenik gabe erabiltzea.

This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.hitlabnz.org/pipermail/artoolkit/attachments/20071003/46e2716c/attachment.html 

--===============1190315739==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
ARToolKit mailing list
ARToolKit@l .................
http://www.hitlabnz.org/mailman/listinfo.cgi/artoolkit

--===============1190315739==--

Este es un mensaje de varios componentes en formato MIME.
--===============0328490715==
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 8bit

Hi there!

I've dowloaded and added to the path of MATLAB the MATLAB Calibration 
Toolbox.
I have followed step by step the instructions of the calibration in [1]. 
It generates three files: "calib_data.mat", "Calib_Results.m" and 
"Calib_Results.mat".
I would like to know wich one of these three files is the one I have to 
use in the "init" method of the ARToolkitPlus Tracker.
I think I have used all of them, but no one works...

[1] http://www.vision.caltech.edu/bouguetj/calib_doc/htmls/example.html

Tanks in advance,
Roberto


---------------------------------------------------------------------------------------------------------------------------------------------------------------------

Imprime sólo lo imprescindible, recuerda tu compromiso con el MEDIO AMBIENTE // Behar beharrezkoa baino ez imprimatu, gogoratu zure INGURUGIROArekiko konpromezua // Before printing think about the ENVIRONMENT

---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción.

Mezu honek eta erantsita dituen agiriek (baldin baditu) isilpeko informazioa izan dezakete. Hori dela eta, hutsegite baten ondorioz jasotzen duenak jakin beza bertan dagoen informazioa ezkutukoa dela eta legeak galarazi egiten duela berori baimenik gabe erabiltzea.

This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by professional privilege. If you are not the intended recipient you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.hitlabnz.org/pipermail/artoolkit/attachments/20071004/d6fe49e3/attachment.html 

--===============0328490715==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________
ARToolKit mailing list
ARToolKit@l .................
http://www.hitlabnz.org/mailman/listinfo.cgi/artoolkit

--===============0328490715==--

As described on the ARTK+ webpage you have to build another file which
contains only a few parameters of those files...

Daniel


rgarrido@l ........ wrote:
> Hi there!
>
> I've dowloaded and added to the path of MATLAB the MATLAB Calibration 
> Toolbox.
> I have followed step by step the instructions of the calibration in [1]. 
> It generates three files: "calib_data.mat", "Calib_Results.m" and 
> "Calib_Results.mat".
> I would like to know wich one of these three files is the one I have to 
> use in the "init" method of the ARToolkitPlus Tracker.
> I think I have used all of them, but no one works...
>
> [1] http://www.vision.caltech.edu/bouguetj/calib_doc/htmls/example.html
>
> Tanks in advance,
> Roberto
>   

_______________________________________________
ARToolKit mailing list
ARToolKit@l .................
http://www.hitlabnz.org/mailman/listinfo.cgi/artoolkit